Combining Electric and Magnetic Forces: Difference between revisions
Lpimentel3 (talk | contribs) |
|||
(14 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
Claimed by | Claimed by Luis Pimentel Fall 2018 | ||
Edited the Velocity Selector section. Went into more detail about why this works and created a VPython trinket demonstrating and visualizing a velocity selector for particles. | |||
Though the pattern in which electric and magnetic forces interact with particles is observably different, their effects can be quantitatively be compared. The principle of adding the two functions of force as a net force is one that now serves as a fundamental principle of electromagnetics. It serves as a building block for many important Laws such as [[Hall Effect]] and [[Motional Emf]]. | Though the pattern in which electric and magnetic forces interact with particles is observably different, their effects can be quantitatively be compared. The principle of adding the two functions of force as a net force is one that now serves as a fundamental principle of electromagnetics. It serves as a building block for many important Laws such as [[Hall Effect]] and [[Motional Emf]]. | ||
Line 68: | Line 68: | ||
The Lorentz Force calculation is now a fundamental principle of electromagnetism. | The Lorentz Force calculation is now a fundamental principle of electromagnetism. | ||
==A Computational Model== | ===A Computational Model=== | ||
Following are diagrams which display a uniform electric field in the +x direction and a uniform magnetic field in +y direction for a proton and an electron, with varying velocities. | Following are diagrams which display a uniform electric field in the +x direction and a uniform magnetic field in +y direction for a proton and an electron, with varying velocities. | ||
Line 128: | Line 128: | ||
===Simple=== | ===Simple=== | ||
A proton is moving with velocity 7e8 in the +x direction. The trajectory of the proton is constant. There is an electric field in the area of 3.6e7 in the +y direction. Calculate the direction and magnitude of the magnetic field acting on the particle? | A proton is moving with velocity 7e8 in the +x direction. The trajectory of the proton is constant. There is an electric field in the area of 3.6e7 in the +y direction. Calculate the direction and magnitude of the magnetic field acting on the particle? | ||
Line 143: | Line 141: | ||
===Middling=== | ===Middling=== | ||
At a particular instant, a proton is moving with velocity <0,5e5,0> m/s and an electron is moving with velocity <-4.2e2,0,0> m/s. The electron is located 1.4e-3 m below the proton (in the -y direction). Determine the net force on the electron due to the proton. | At a particular instant, a proton is moving with velocity <0,5e5,0> m/s and an electron is moving with velocity <-4.2e2,0,0> m/s. The electron is located 1.4e-3 m below the proton (in the -y direction). Determine the net force on the electron due to the proton. | ||
Line 157: | Line 153: | ||
===Difficult=== | ===Difficult=== | ||
[[File:Middle_Example_A.jpg|thumb| '''Figure 5.''' Middle example diagram. ]] | [[File:Middle_Example_A.jpg|thumb| '''Figure 5.''' Middle example diagram. ]] | ||
A copper bar of length L and zero resistance slides at a constant velocity, v. There is a uniform magnetic field, B, directed into the page. A voltmeter is connected across a resistor, R, and reads ΔV. See '''Figure 5'''. Determine the direction of the magnetic force on the diagram and the current through the resistor. Your answer should be in terms of the given variables. | |||
Determine the direction of the magnetic force on the diagram and the current through the resistor. Your answer should be in terms of the given variables. | |||
[[File:Middle_Example_B.jpg|thumb| '''Figure 6.''' Middle example solution. ]] | [[File:Middle_Example_B.jpg|thumb| '''Figure 6.''' Middle example solution. ]] | ||
''Current through the resistor | :''Solution:'' | ||
:Step 1: Direction of the Magnetic Force - Use right hand rule or <math> {\vec v \times\vec B} </math>. See '''Figure 6'''. | |||
:Step 2: Current through the resistor - | |||
::: <math> {ΔV}_{round trip} = 0 </math> | |||
::: <math> {{ΔV}_{round trip} + motional emf - {ΔV}_{resistor} = 0} </math> | |||
::: <math> motional emf = IR </math> | |||
::: <math> I = \frac {motional emf} {R} </math> | |||
::: <math> {|q\vec E| = |q\vec v\vec B|} </math>, <math> {|ΔV| = IR} </math> | |||
::: <math> {qE = qvB} </math> | |||
::: <math> E = vB </math> | |||
::: <math> motional emf = |ΔV| = E*ΔL = vBL </math> | |||
::: <math> {I = \frac {vBL} {R}} </math> | |||
==Connectedness== | |||
The Lorentz Force principle has been a component in many modern day inventions and critical building block for many physics principles. With known forces, we can predict the very important figure, the velocity and trajectory of a moving particle. | |||
===Applications=== | |||
'''''Velocity Selector''''' | |||
[[File:Velocityselector2.png|thumb| '''Figure 7.''' Illustration of a Velocity Selector ]] | |||
The Velocity Selector is a device used to filter particles based on their velocity. A Velocity Selector uses controlled, perpendicular, electric and magnetic fields to filter certain charged particles (See '''Figure 7''' ). These electric and magnetic fields exert a Lorentz force on the particle. For the particle to remain unaffected, the Lorentz force must be zero. Therefore, we have: | |||
<math> \vec{F}_{Lorentz} = q\vec{E} + q\vec{v} ⨯ \vec{B} = 0 </math> | |||
<math> \lvert q\vec{E}\rvert = \lvert q\vec{v} ⨯ \vec{B}\rvert </math> | |||
<math> qE= qvB </math> | |||
E | <math> v = E/B </math> | ||
From this relationship we can adjust to our electric and magnetic fields to pass particles with a desired speed of a narrow band through a target area. Particles at a desired speed will remain unaffected while other particles with undesired speeds will be deflected. This technique is used in technologies such as electron microscopes and spectrometers. | |||
The following VPython trinket module is a demonstration of a velocity selector. Two particles of different speeds pass through an area with perpendicular magnetic and electric fields. Within this trinket, you can change the initial values of the velocity selector and particle velocities to see how this affects the particles' motion as they try to pass through a circular area. | |||
[[File:velocitySelector3Stages.jpg|thumb| '''Figure 7.1.''' SImulation of a Velocity Selector ]] | |||
[https://trinket.io/glowscript/d3067081b7 Velocity Selector Trinket] | |||
'''''Electric Motor''''' | '''''Electric Motor''''' | ||
Line 216: | Line 220: | ||
[[Inductance]] | [[Inductance]] | ||
==History== | |||
The relationship between electric and magnetic forces was first questioned in the mid-18th century when Johann Tobias Mayer (1760) and Henry Cavendish (1762) proposed that the force on magnetic poles and electrically charged objects followed the inverse-square law, which was proven to be true by Charles-Augustin in 1784. | |||
Following Michael Faraday's proposal of the concept of electric and magnetic fields, James Clerk Maxwell was first to mathematically prove the concepts. In 1865, Maxwell's field equations consisted of some form of the Lorentz force equation, but at the time it was not clear how it related to forces on charged moving particles. J.J Thomson was the first to attempt a derivation of Maxwell's field equations, and he derived a basic form of the formula for the electromagnetic forces on a charged moving particle in relation to the properties of the particle and its external fields. In 1892, Hendrik Lorentz corrected mistakes of the old formula and derived the modern form of the equation, which contains the forces due to both electric and magnetic fields. | |||
== See also == | == See also == |
Latest revision as of 02:13, 25 November 2018
Claimed by Luis Pimentel Fall 2018 Edited the Velocity Selector section. Went into more detail about why this works and created a VPython trinket demonstrating and visualizing a velocity selector for particles.
Though the pattern in which electric and magnetic forces interact with particles is observably different, their effects can be quantitatively be compared. The principle of adding the two functions of force as a net force is one that now serves as a fundamental principle of electromagnetics. It serves as a building block for many important Laws such as Hall Effect and Motional Emf.
The Main Idea
If a charged particle within an electric field is moving in a magnetic field, the particle is subject to an Electric Force and a Magnetic Force. The net force on the particle is called the Lorentz Force, which is the sum of electric and magnetic forces.
A Mathematical Model
Electric Forces
• A particle being acted upon by an electric force will move in a straight line, in the path, or negative path depending on charge, of the the electric field line (See Figure 1) .
• Electric fields point in a direction radially outward/ inward of a charged particle. There are four possible scenarios for the interaction of 2 charged particles:
- 1. A negatively charged particle (p1) is acting on a negatively charged particle (p2)
- - p2 feels force pointing radially outward from p2
- 2. A positively charged particle (p1) is acting on a negatively charged particle (p2)
- - p2 feels force pointing radially inward toward p2
- 3. A negatively charged particle (p1) is acting on a positively charged particle (p2)
- - p2 feels force pointing radially inward toward p1
- 4. A positively charged particle (p1) is acting on a positively charged particle (p2)
- - p2 feels force pointing radially outward from p1
• The electric force formula: [math]\displaystyle{ \vec {F}_{E}=q\vec E }[/math]
- - Force on the observed particle is determined by the interaction of the charge of the observed particle and the electric field created by other charged particles.
Magnetic Forces
• The magnetic force on a charged particle is orthogonal to the magnetic field.
• The particle must be moving with some velocity for a magnetic force to be present.
• Particles move perpendicular to the magnetic field lines in a helical manner (See Figure 2)
• To find the magnetic force, you can use the Right Hand Rule as follows (See Figure 3):
- 1. Thumb in direction of the velocity
- 2. Fingers in the direction of the magnetic field
- 3. Your palm will face in the direction of the Magnetic Force
• The magnetic force formula: [math]\displaystyle{ {\vec {F}_{M} = q\vec {v}\times\vec {B}} }[/math]
- - q is the charge of the moving charge, including its sign
- - [math]\displaystyle{ \vec v }[/math] is the velocity of the moving charge
- - [math]\displaystyle{ \vec B }[/math] is the applied magnetic field, in Tesla
- - Note: if [math]\displaystyle{ \vec v }[/math] and [math]\displaystyle{ \vec B }[/math] are parallel to each other, [math]\displaystyle{ {\vec {F}_{M} = 0} }[/math] ([math]\displaystyle{ {\vec {A}\times\vec {B} = |\vec A||\vec B|sin(θ) = 0} }[/math])
Electric and Magnetic Forces Combined
• The Lorentz Force formula:
- [math]\displaystyle{ {\vec {F}_{net} = \vec {F}_{E} + \vec {F}_{M}} }[/math]
- [math]\displaystyle{ {\vec {F}_{net} = q\vec E + q\vec {v}\times\vec {B}} }[/math]
• When the net force is equal to zero, the velocity stays constant.
- [math]\displaystyle{ {\vec {F}_{E} = \vec {F}_{M}} }[/math]
- [math]\displaystyle{ {q\vec E = q\vec {v}\times\vec {B}} }[/math]
As seen in Figure 4 , when the net forces acting on a particle are balanced the electric field, magnetic field, and velocity vector are all perpendicular to each other. The electric and magnetic forces are equal but opposite. When forces are not balanced the trajectory of the the particle will change.
The Lorentz Force calculation is now a fundamental principle of electromagnetism.
A Computational Model
Following are diagrams which display a uniform electric field in the +x direction and a uniform magnetic field in +y direction for a proton and an electron, with varying velocities.
The force equations and the right hand rule can both be used to determine the directions of the forces:
- - According to [math]\displaystyle{ {\vec {F}_{E} = q\vec E} }[/math], [math]\displaystyle{ {\vec {F}_{Eproton}} }[/math] points in the direction of [math]\displaystyle{ \vec E }[/math] and [math]\displaystyle{ {\vec {F}_{Eelectron}} }[/math] points in opposite direction of [math]\displaystyle{ \vec E }[/math].
- - According to [math]\displaystyle{ {\vec {F}_{M} = q\vec {v}\times\vec {B}} }[/math], [math]\displaystyle{ \vec {F}_{M} = 0 }[/math] when [math]\displaystyle{ \vec v }[/math] is parallel to [math]\displaystyle{ \vec B }[/math]. The direction of [math]\displaystyle{ \vec {F}_{M} }[/math] can be determined by the cross multiplication of [math]\displaystyle{ \vec v }[/math] and [math]\displaystyle{ \vec B }[/math] and by the sign of [math]\displaystyle{ q }[/math].
• Proton at rest:
• Proton moving in +x direction:
• Proton moving in +y direction:
• Proton moving in +z direction:
• Electron at rest:
• Electron moving in +x direction:
• Electron moving in +y direction:
• Electron moving in +z direction:
Examples
Simple
A proton is moving with velocity 7e8 in the +x direction. The trajectory of the proton is constant. There is an electric field in the area of 3.6e7 in the +y direction. Calculate the direction and magnitude of the magnetic field acting on the particle?
- Solution:
- Step 1: [math]\displaystyle{ {|q\vec E| = |q\vec v\vec B|} }[/math]
- Step 2: [math]\displaystyle{ {\vec {E} = \vec {v}\vec {B}} }[/math]
- Step 3: [math]\displaystyle{ {\vec {B} = \frac {\vec {E}} {\vec {v}} = \frac {3.6e7} {7e8}} }[/math]
- Answer: [math]\displaystyle{ {\vec {B} = 0.051 T} }[/math]
The magnetic field is in the +z direction.
Middling
At a particular instant, a proton is moving with velocity <0,5e5,0> m/s and an electron is moving with velocity <-4.2e2,0,0> m/s. The electron is located 1.4e-3 m below the proton (in the -y direction). Determine the net force on the electron due to the proton.
- Solution:
- Step 1: [math]\displaystyle{ {\vec {F}_{net} = \vec {F}_{E} + \vec {F}_{B}} }[/math]
- Step 2: [math]\displaystyle{ {\vec {F}_{net} = \vec {F}_{E} + 0 = q\vec {E}} }[/math] (At the electron's location, [math]\displaystyle{ \vec B = 0 }[/math] because the velocity of the proton is parallel to [math]\displaystyle{ \hat{r} }[/math])
- Step 3: [math]\displaystyle{ {\vec {E} = \frac {1} {4πεo} \frac {q} {r^2} \hat{r}} }[/math] ([math]\displaystyle{ \hat{r} = \lt 0,-1,0\gt and r = 1.4e-3 m }[/math])
- Step 4: [math]\displaystyle{ \vec E = \lt 0,-7.35e-4,0\gt N/C }[/math]
- Step 5: [math]\displaystyle{ {\vec {F}_{net} = -e \vec E = \lt 0,1.18e-22,0\gt N} }[/math]
Difficult
A copper bar of length L and zero resistance slides at a constant velocity, v. There is a uniform magnetic field, B, directed into the page. A voltmeter is connected across a resistor, R, and reads ΔV. See Figure 5. Determine the direction of the magnetic force on the diagram and the current through the resistor. Your answer should be in terms of the given variables.
- Solution:
- Step 1: Direction of the Magnetic Force - Use right hand rule or [math]\displaystyle{ {\vec v \times\vec B} }[/math]. See Figure 6.
- Step 2: Current through the resistor -
- [math]\displaystyle{ {ΔV}_{round trip} = 0 }[/math]
- [math]\displaystyle{ {{ΔV}_{round trip} + motional emf - {ΔV}_{resistor} = 0} }[/math]
- [math]\displaystyle{ motional emf = IR }[/math]
- [math]\displaystyle{ I = \frac {motional emf} {R} }[/math]
- [math]\displaystyle{ {|q\vec E| = |q\vec v\vec B|} }[/math], [math]\displaystyle{ {|ΔV| = IR} }[/math]
- [math]\displaystyle{ {qE = qvB} }[/math]
- [math]\displaystyle{ E = vB }[/math]
- [math]\displaystyle{ motional emf = |ΔV| = E*ΔL = vBL }[/math]
- [math]\displaystyle{ {I = \frac {vBL} {R}} }[/math]
Connectedness
The Lorentz Force principle has been a component in many modern day inventions and critical building block for many physics principles. With known forces, we can predict the very important figure, the velocity and trajectory of a moving particle.
Applications
Velocity Selector
The Velocity Selector is a device used to filter particles based on their velocity. A Velocity Selector uses controlled, perpendicular, electric and magnetic fields to filter certain charged particles (See Figure 7 ). These electric and magnetic fields exert a Lorentz force on the particle. For the particle to remain unaffected, the Lorentz force must be zero. Therefore, we have:
[math]\displaystyle{ \vec{F}_{Lorentz} = q\vec{E} + q\vec{v} ⨯ \vec{B} = 0 }[/math]
[math]\displaystyle{ \lvert q\vec{E}\rvert = \lvert q\vec{v} ⨯ \vec{B}\rvert }[/math]
[math]\displaystyle{ qE= qvB }[/math]
[math]\displaystyle{ v = E/B }[/math]
From this relationship we can adjust to our electric and magnetic fields to pass particles with a desired speed of a narrow band through a target area. Particles at a desired speed will remain unaffected while other particles with undesired speeds will be deflected. This technique is used in technologies such as electron microscopes and spectrometers.
The following VPython trinket module is a demonstration of a velocity selector. Two particles of different speeds pass through an area with perpendicular magnetic and electric fields. Within this trinket, you can change the initial values of the velocity selector and particle velocities to see how this affects the particles' motion as they try to pass through a circular area.
Electric Motor
An electric motor is a device that uses the Lorentz force to convert electric energy into mechanical energy. Using the magnetic torque principle, electric energy is created by using the magnetic field of a magnet. The torque laws are based off the principles of the net electric and magnetic forces.
Here are other principles that use the net force of magnetic and electric forces as a building block:
Motional Emf using Faraday's Law
History
The relationship between electric and magnetic forces was first questioned in the mid-18th century when Johann Tobias Mayer (1760) and Henry Cavendish (1762) proposed that the force on magnetic poles and electrically charged objects followed the inverse-square law, which was proven to be true by Charles-Augustin in 1784.
Following Michael Faraday's proposal of the concept of electric and magnetic fields, James Clerk Maxwell was first to mathematically prove the concepts. In 1865, Maxwell's field equations consisted of some form of the Lorentz force equation, but at the time it was not clear how it related to forces on charged moving particles. J.J Thomson was the first to attempt a derivation of Maxwell's field equations, and he derived a basic form of the formula for the electromagnetic forces on a charged moving particle in relation to the properties of the particle and its external fields. In 1892, Hendrik Lorentz corrected mistakes of the old formula and derived the modern form of the equation, which contains the forces due to both electric and magnetic fields.
See also
Motional Emf using Faraday's Law
Further reading
Books, Articles or other print media on this topic
| MIT Physics notes on Lorentz force
External links
Great youtube videos on Lorentz Force Law: |Lorentz Force Law Video 1 | Lorentz Force Law Video 2
References
Boundless. “Electric vs. Magnetic Forces.” Boundless Physics. Boundless, 21 Jul. 2015. Retrieved 05 Dec. 2015 from https://www.boundless.com/physics/textbooks/boundless-physics-textbook/magnetism-21/motion-of-a-charged-particle-in-a-magnetic-field-158/electric-vs-magnetic-forces-554-11176/
Chabay, Ruth W., and Bruce A. Sherwood. Matter & Interactions. 4th ed. Vol. 2. Hoboken, NJ: Wiley, 2015. 812-814. Print.
All images found on google image search: https://en.wikipedia.org/wiki/Magnetic_field https://en.wikipedia.org/wiki/Wien_filter http://aplusphysics.com/wordpress/regents/em/electric-field/