Gauss's Law

Claimed by Jarrod Waters (SPRING 2019)

Gauss's Law is a very powerful law that spans a diverse array of fields, with applications in physics, mathematics, chemistry, and engineering, among others. It, along with James Maxwell's other three equations form the foundation of classical electrodynamics.

The Main Idea

Picture a three-dimensional solid object in space that does not have any charges around it. Suppose that you discover an electric field is directed radially outward from all faces of the object. You then measure the magnitude of the electric field at each face. Without being able to open the object and determine its charge distribution, how might you determine the charge inside the object?

This is a simple situation illustrating the basic idea of Gauss's Law.

Gauss's Law elegantly relates the net charge enclosed within a surface to the patterns of electric field that flow over its faces (Electric Flux). In words, the law states that the net electric flux outside a surface is equal to the ratio of the total enclosed charge inside the surface to the permittivity of free space. Symbolically, this is written as the area integral

[math]\displaystyle{ \oint \vec E \cdot \hat{n} ~dA = \frac{\sum Q_{inside}}{\varepsilon_{0}} }[/math]

where [math]\displaystyle{ \vec E }[/math] is the net electric field acting through the surface, [math]\displaystyle{ \hat{n} }[/math] is the unit normal vector perpendicular to the face of the surface, and [math]\displaystyle{ dA }[/math] is the surface area of the face being examined.

From the definition of Electric Flux, Gauss's Law may also be written equivalently as

[math]\displaystyle{ \Phi_{el} = \frac{Q_{enclosed}}{\varepsilon_{0}} }[/math]

Additionally, Coulomb's Law and Gauss's Law are innately connected. Coulomb's Law relates charge to electric field. Gauss's Law relates charge to electric flux. Both laws, relate charge to an electrical property. For clarification, the electric flux is a quantity that is equal to the product of the perpendicular component of E-field and the area of the closed surface. Not only do these two laws look similar at the surface, but using one law it is quite easy to derive the other law.

We know from the previous introduction of flux that there is a relationship between the electric flux on a closed surface and the charges inside the surface. However, we would like to figure out what that particular factor is.

We start by considering a point charge of +Q enclosed by an imaginary spherical shell.

Everywhere on the imaginary shell, the electric field produced is parallel to the normal unit vector. Cos(0) = 1, so the dot product evaluates to the magnitude of the electric field. Recall that the surface area of the imaginary sphere is 4*pi*r^2. With Coulomb's Law and the surface area of a sphere, we get that electric flux is equal to +Q/ε0. This implies that the factor is 1/ε0.

Note that if the point charge was negative, the electric field would still be parallel, just opposite direction. Cos(180) = -1 so the dot product would be -1 times the magnitude of the electric field.

To summarize, the idea of Gauss's Law is that the electric flux out of a closed surface is equivalent to the charge enclosed, divided by the permittivity.

A Mathematical Model

To understand this law more fully, one can look at the diagram below. As can be seen on the left side of this diagram, change in flux equals electric field multiplied by change in area. This is the basis for the equation ф=∮E da. When you integrate the change of A, you get the flux.

Image Taken from Hyperphysics

To more clearly state it, in integral form, the formula for this Law is the electric flux equals the total charge contained by a closed surface, divided by the permittivity (epsilon naught: ε0 = 8.854187817...×10−12 F⋅m−1).

Additionally, Gauss's law can be written in differential form.

In this equation, ρ is electric charge density, ∇*E is divergence of electric field, and ε0 = 8.854187817...×10−12 F⋅m−1.

The picture below illustrates Gauss's Law with a detailed explanation.

Examples

Easy Example

Looking at the images on the right hand side of the screen, we find an easy example in which we will find the electric field in a uniformly charged plate (+Q).

1. Recall Gauss's Formula:

2. Now look carefully at the diagram below and go through each of the surfaces one by one. Ask yourself, in what direction does the normal vector point?

3. Therefore, in the sides where there is 90 degree angle made with E, the flux will just be zero!

4. In the only case where the flux is not zero is in the sides A and B of the box (which are the same in magnitude). We compute the flux as follows:

Remember, when doing Gauss's problems, always think about you n vector before diving into the formula.

Intermediate Examples:

Example 1: The example below shows how to determine the net charge located inside a box and is fundamental to understanding Gauss's Law. It demonstrates the idea that to calculate the net charge inside a box, we have to start off by calculating the fluxes acting on all surfaces on the box by using the Gauss's Law.

Example 2: The example below shows how to calculate the net charge enclosed by a box.

Example 3: In order to apply Gauss's Law, it is important to be certain you are working with a closed surface, then set electric flux equal to the internal field divided by the permittivity (epsilon naught: ε0 = 8.854187817...×10−12 F⋅m−1). An example of this Law being applied can be found below.

Example 4: In this example, the Qenc is equal to zero. This was determined by adding up all of the fluxes through every surface. This can also be determined by seeing that the same fluxes travel through the same areas of the tent. The equation Ф=∮B da=0 helps explain this when considering that Ф is the same in both equations.

Connectedness

Gauss's Law can be found in many areas of science, technology, engineering, and mathematics. In fact, Gauss's Law and other Maxwell Equations form a basis for electrodynamics. They are the fundamental core of this field of study. Gauss's Law is also connected to the Gaussian/Normal distribution, which is a continuous probability distribution that is characterized by a bell-shaped curve. This distribution is found throughout statistics and probability and is used everyday by people in STEM fields.

As Industrial and Systems Engineering majors, we deal with many statistical distributions. A very important fundamental distribution is the Gaussian distribution or the Normal Distribution. With inference, the Gaussian Distribution comes up in confidence intervals for single statistics. With comparison inference, like finding the pairwise difference between statistics, generally we use other distributions such as the T-Distribution. However, the T-Distribution approximates the Gaussian distribution with degrees of freedom greater than 29.

As civil and environmental engineering majors, we also deal with the Gaussian/Normal Distribution in our fields. As an example, the speed data of traffic on a highway is said to follow the normal distribution.

Additional to many engineering majors. Gauss's Law has applications in many different STEM job fields. Engineering majors learn about the different Gaussian laws in college and apply them in there jobs. Millions of people are applying his laws to the world and will continue to do so. Gauss has had a huge impact on the world and will continue to have a big impact on the future. Gauss has done great work with his work.

History

Carl Friedrich Gauss was a German Mathematician and Physicist. He contributed to a wide variety of fields especially in mathematical and scientific study. In fact his contributions are so great that he is referred to as the "greatest mathematician since antiquity" and the "foremost of mathematicians". These names highlight his illustriousness in those fields as he is considered one of the most impactful and influential contributors to the fields of Mathematics and Physics in history.

See also

Gauss's Law is tied in closely with the other of Maxwell's equations that can be found here in the Physics Book.

http://physicsbook.gatech.edu/Gauss%27s_Flux_Theorem

http://physicsbook.gatech.edu/Faraday%27s_Law

http://physicsbook.gatech.edu/Magnetic_Flux

http://physicsbook.gatech.edu/Ampere%27s_Law

External links

http://physics.info/law-gauss/

http://teacher.nsrl.rochester.edu/phy122/Lecture_Notes/Chapter24/Chapter24.html

https://en.wikipedia.org/wiki/Gauss%27s_law

https://en.wikipedia.org/wiki/Carl_Friedrich_Gauss

http://physicscatalyst.com/elec/guass_0.php

References

http://hyperphysics.phy-astr.gsu.edu/hbase/electric/gaulaw.html

http://www.pas.rochester.edu/~stte/phy114S09/lectures/lect04.pdf

https://web.iit.edu/sites/web/files/departments/academic-affairs/academic-resource-center/pdfs/Gauss_Law.pdf

http://www.sciencedirect.com/science/article/pii/S2090447911000165

spiff.rit.edu

study.com