Current

Claimed by spencer

Explanation of Current Through a Wire

The Main Idea

The electric current is the continual flow of electric charge through an area. In a wires you will be studying, the current is constant regardless of its width and diameter. It is important to note that the charge in the circuits you will be dealing with are not in equilibrium, but instead, in a steady state. The distinction and the circuits state become clear when you remember that a metal in equilibrium contains no mobile charge in motion. Since there is flow (motion) with a current, the velocity cannot be zero, and equilibrium is not the current state. In a steady state, the particles may be moving however they please, but their net drift velocity stays constant. The most common charge carrier you will encounter is negative. While the positive charge can be the mover, in almost all metals the current consists of drifting electrons. The direction the electrons flow is not the same as the conventional current, however. Before scientists knew that electrons were the common charge carriers, they discovered current. And, with only two choices, they chose to treat the moving charge as positive. This may seem annoying at first, but there are some benefits to using conventional current over the directly opposed "electron current". For one, it flows from the positive end of a battery toward the negative end, and from high to low energy.

A Mathematical Model

Assume uniform density [math]\displaystyle{ n }[/math] of electrons (uniform current) in a wire of area [math]\displaystyle{ A }[/math]

[math]\displaystyle{ i=density⋅volume/seconds =nA v }[/math]

If a charge distribution of density [math]\displaystyle{ ρ }[/math] moves with the velocity [math]\displaystyle{ v }[/math], the charge per unit time through [math]\displaystyle{ ΔA }[/math] is [math]\displaystyle{ ρv⋅nΔA }[/math] [math]\displaystyle{ Δq=ρv⋅nΔAΔt }[/math]. [math]\displaystyle{ ρ = Nq }[/math] The charge per unit time is then [math]\displaystyle{ ρv⋅nΔS }[/math], from which we get the current density to be[math]\displaystyle{ Nqv }[/math]

The current I through the surface is [math]\displaystyle{ I=∫Nqv⋅dA }[/math]

[math]\displaystyle{ I = |q|nAv }[/math]

[math]\displaystyle{ i = nAv }[/math]

A Computational Model

How do we visualize or predict using this topic. Consider embedding some vpython code here Teach hands-on with GlowScript

Examples

Be sure to show all steps in your solution and include diagrams whenever possible

References

https://en.wikipedia.org/wiki/Electric_current http://www.feynmanlectures.caltech.edu/II_13.html#Ch13-S2 http://hyperphysics.phy-astr.gsu.edu/hbase/electric/elecur.html