VPython MapReduceFilter

Sabrina Yang - Spring 2026

Introduction

In Python, map(), filter(), and reduce() are known as higher-order functions. Higher-order functions are functions that take other functions as arguments. VPython simulations usually have hundreds of objects that all follow the same physics equations, and writing for-loops to do the same calculation over and over can be inefficient. map(), filter(), and reduce() take care of the for-loops, allowing you to focus on the point of the code itself.

Each function does something different:

• map(): applies a function to every element in a list
• filter(): iterates through a list and only keeps the elements that meet a certain condition
• reduce(): takes a whole list and turns it into one single value

Python 3 note: map() and filter() do not execute until you ask for the results. Wrap them in list() to get the results. reduce() has to be imported before you can use it:

from functools import reduce

GlowScript note: GlowScript does not support lambda expressions or the functools module. Use regular def functions instead of lambdas, and write reduce() yourself. Here is an example of this in the simulation section below.

---

Background

In Python, functions are objects, meaning you can:

• Store a function in a variable
• Pass a function into another function as an argument
• Get a function back as a return value

A few reasons why writing code this way is efficient:

• It is easy to read: You can immediately tell what the program

is doing. It is obvious that the program is saying to "apply this formula to every mass." There is no complex decoding required.

• Fewer bugs: Every time you write a for-loop you have to manually keep track of index

variables, which is easy to make mistakes. These functions handle the indices, so there is less room for errors.

• You can chain them: The output of map() goes straight into

filter() or reduce() without extra steps, which keeps the variables clean and short.

---

Lambda Expressions

A lambda expression is a function you write in one line without giving it a name. The format is:

lambda <parameters>: <expression>

The function only exists at the point where it is used. These two do the exact same thing:

# Regular way
def square(x):
    return x**2

# Lambda way
square = lambda x: x**2

Lambdas save you from having to define a whole separate function when you only need it once:

# Without lambda: needs a function defined somewhere else
result = list(map(square, [1, 2, 3, 4]))

# With lambda: no separate function needed
result = list(map(lambda x: x**2, [1, 2, 3, 4]))
# Result: [1, 4, 9, 16]

They can also take two inputs, which comes up when using reduce():

from functools import reduce
total = reduce(lambda acc, x: acc + x, [1, 2, 3, 4], 0)
# Result: 10

Lambda vs def — when to use which:

• Use a lambda when the function is short, only needed once, and passed right

into another function

• Use def when the function is longer or used in multiple places

GlowScript note: Lambdas do not work in GlowScript at all. Always use def when writing code for Trinket.

---

Inputs and Type Matching

All three functions follow the same basic structure:

function_name(function, list)

The first argument is the function you want to use. The second is the list of data you want to run it on, which can be a list, tuple, etc.

One thing to watch out for: the function has to be able to work with any item is in the list. If your list has decimal numbers but your function expects whole numbers, Python will throw an error.

Example using a named function:

def cubed(x):
    return x**3

items = [1, 2, 3, 4]
result = list(map(cubed, items))
# Result: [1, 8, 27, 64]

The same thing with a lambda:

items = [1, 2, 3, 4]
result = list(map(lambda x: x**3, items))
# Result: [1, 8, 27, 64]

You can also pass Python's built-in functions straight in:

words = ['hello', 'world', 'vpython']
lengths = list(map(len, words))
# Result: [5, 5, 7]

---

Map()

How it works

map(function, list) runs a function on every single element in a list and gives you back all the results. The original list stays the same; you get a new list of updated values.

map(function, list)

So for a list [a, b, c, d] and some function f:

map(f, [a, b, c, d])  →  [f(a), f(b), f(c), f(d)]

Basic example

numlist = [1, 2, 3, 4, 5]
result = list(map(lambda x: x * 2, numlist))
# Result: [2, 4, 6, 8, 10]

Physics examples

Gravitational weight (F = mg) for the masses:

g = 9.8  # m/s^2
masses = [0.5, 1.0, 2.5, 5.0, 10.0]  # kg

weights = list(map(lambda m: m * g, masses))
# Result: [4.9, 9.8, 24.5, 49.0, 98.0]  Newtons

Kinetic energy of the velocities:

mass = 2.0   # kg
velocities = [3.0, 5.5, 2.1, 8.0]  # m/s

ke_list = list(map(lambda v: 0.5 * mass * v**2, velocities))
# Result: [9.0, 30.25, 4.41, 64.0]  Joules

Converting temperature from Celsius to Kelvin:

temps_C = [0, 20, 37, 100, -273.15]
temps_K = list(map(lambda T: T + 273.15, temps_C))
# Result: [273.15, 293.15, 310.15, 373.15, 0.0]  Kelvin

map() vs a for-loop

Both of these give the same answer, but map() is more concise:

# For-loop
weights = []
for m in masses:
    weights.append(m * 9.8)

# map() — same thing in one line
weights = list(map(lambda m: m * 9.8, masses))

---

Filter()

How it works

filter(function, list) iterates through a list and only keeps the elements where the function returns True.

filter(function, list)
filter(lambda x: condition, list)

Example

numbers = [3, 7, 5, 2, 1, 6]
result = list(filter(lambda x: x > 3, numbers))
# Result: [7, 5, 6]

Physics examples

Retrieving only the fastest particles:

speeds = [120, 340, 95, 500, 210, 80]  # m/s

fast_particles = list(filter(lambda v: v > 200, speeds))
# Result: [340, 500, 210]

Keeping the positive charges:

charges = [-1.6e-19, 1.6e-19, -3.2e-19, 3.2e-19, 0, 1.6e-19]  # Coulombs

positive = list(filter(lambda q: q > 0, charges))
# Result: [1.6e-19, 3.2e-19, 1.6e-19]

Removing particles that exited the simulation boundary:

# Each particle p has a .pos.x value for its x position
boundary = 10.0  # meters

inside = list(filter(lambda p: abs(p.pos.x) < boundary, particles))

Passing None as the function

If you pass None instead of a function, filter() removes every zero, empty string, None, and False from the list:

messy = [1, 0, 3, None, 5, 0, 7]
clean = list(filter(None, messy))
# Result: [1, 3, 5, 7]

---

Reduce()

How it works

reduce(function, list, starting value) takes a list and returns a single value.

The function you pass in needs to take two inputs:

• The running total so far
• The next item in the list

After each step, the result becomes the new total for the next step.

from functools import reduce
reduce(function, list, starting value)

Step-by-step walkthrough

from functools import reduce

numbers = [1, 2, 3, 4]
result = reduce(lambda x, y: x * y, numbers)
# Step 1: x=1, y=2  →  1 * 2 = 2
# Step 2: x=2, y=3  →  2 * 3 = 6
# Step 3: x=6, y=4  →  6 * 4 = 24
# Final result: 24

Physics examples

Adding up all the masses in a system:

from functools import reduce

masses = [1.0, 2.0, 3.0, 4.0]  # kg
total_mass = reduce(lambda acc, m: acc + m, masses, 0.0)
# Result: 10.0 kg

Finding the fastest particle in a list:

from functools import reduce

speeds = [3.2, 7.8, 1.1, 9.4, 5.5]  # m/s
max_speed = reduce(lambda a, b: a if a > b else b, speeds)
# Result: 9.4 m/s

Total work done (W = F·d):

from functools import reduce

forces = [10.0, 25.0, 5.0, 40.0]       # Newtons
displacements = [2.0, 1.5, 3.0, 0.5]   # meters

work_list = list(map(lambda fd: fd[0] * fd[1], zip(forces, displacements)))
total_work = reduce(lambda acc, w: acc + w, work_list, 0.0)
# Result: 20.0 + 37.5 + 15.0 + 20.0 = 92.5 Joules

Watch out

Always give reduce() a starting value as the third argument. If the list is empty and there is no starting value, Python will crash. With a starting value, an empty list will give you that value back instead:

reduce(lambda acc, x: acc + x, [], 0.0)
# Returns 0.0 safely

---

Combining map(), filter(), and reduce()

It is also efficient that functions can be chained together.

Example: kinetic energy

from functools import reduce

# Step 1: filter() — drop all values below 3.0 m/s
moving = list(filter(lambda p: p.speed > 3.0, particles))

# Step 2: map() — calculate KE for each remaining particle
ke_list = list(map(lambda p: 0.5 * p.mass * p.speed**2, moving))

# Step 3: reduce() — add them all up
total_ke = reduce(lambda acc, ke: acc + ke, ke_list, 0.0)
print("Total KE of fast particles:", round(total_ke, 2), "J")

This filter → map → reduce pattern shows up all the time in physics simulations. Pick a group of objects, apply a formula to each one, then get one final number out of it. That is basically what these three functions are built for.

---

Gravitational potential energy at different heights:

g = 9.8   # m/s^2
m = 2.0   # kg
heights = [1.0, 5.0, 10.0, 20.0, 50.0]  # meters

pe_list = list(map(lambda h: m * g * h, heights))
# Result: [19.6, 98.0, 196.0, 392.0, 980.0]  Joules

Electric force on an electron at different distances from a charge (Coulomb's law):

k = 8.99e9   # N·m^2/C^2
Q = 1.0e-6   # source charge, Coulombs
r_list = [0.1, 0.2, 0.5, 1.0]  # meters

forces = list(map(lambda r: k * Q * 1.6e-19 / r**2, r_list))

---

Interactive Simulation

The following GlowScript simulation shows all three functions working together in a real physics example: map(), filter(), and reduce() in VPython Physics — Trinket

The simulation puts five spheres in a row, each with a different mass between 1 and 8 kg and a different speed between 1.5 and 6 m/s. The size of each sphere matches its mass so you can see the difference right away.

• map() goes through every mass and calculates the weight using F = mg.

The weight of each sphere gets printed to the console.

• filter() checks each sphere's speed and keeps the ones faster

than 3.0 m/s.

• reduce() is written by hand since GlowScript does not have the

functools module. It adds up the kinetic energy of every sphere one by one until it has one total number for the whole system, which then gets printed.

This simulation is an accurate visualization of how all three functions work together.

---

References

1. Python map, filter, reduce — bogotobogo.com

2. Map, Filter — Python Tips

3. VPython Documentation — vpython.org

4. Python 3 Built-in Functions (map, filter) — Python Software Foundation

5. functools module (reduce) — Python Software Foundation

6. Functional Programming HOWTO — Python Software Foundation

7. Python's map() — Real Python

8. Python's filter() — Real Python

9. Python's reduce() — Real Python

10. Lambda Expressions in Python — Real Python

11. Functional Programming in Python — GeeksforGeeks

12. Higher-Order Functions in Python — GeeksforGeeks

13. GlowScript VPython — Official Site

14. GlowScript on Trinket

15. VPython Official Documentation